This foot is most suitable to sew blindhems or to topstitch edges. The stitches only pierce the hem so that the stitch holes are hardly visible on the right side of the fabric. The blindstitch foot for Dual Feed is provided with a recess on the back side of the presser foot to activate the integrated Dual Feed. This allows an even feed of “sticky” materials.
Switch off the machine. Attach the foot as described in the instruction manual and activate the Dual Feed.
- Blind hems
- Topstitching edges
Stitch type: blindstitch
Stitch length: can be adjusted as required
Feed dog: raised
Prepare the hem by pressing around the hem. Fold back the hem so that the edge of the fabric is next to the folded edge. Fabrics that fray should be neatened beforehand. With lightweight fabrics, the edge of the hem can be placed under the fold.
Position the fabric so that the needle stitches straight through the folded edge when it moves to the left. Turn the guide screw to align the guide with the folded edge. Slowly sew, guiding the guide along the fold. If necessary, adjust the position of the guide again.